RIBBONS

To complete our line of the Automatic ID products, EASYLABEL EUROPA can now provide you Thermal Transfer Ribbons. Of course, our Thermal Transfer Ribbons are suitable for use in the THARO Printer Series but also for any model of Thermal Transfer Printer on the market.

Formulation : Wax, Wax 1LW, Wax-Resin, Wax-Resin Premium, Resin, Near Edge Ribbon and Colour Thermal Transfer Ribbon.

LABELS

To complete our line of the Automatic ID products, EASYLABEL EUROPA can now provide you Thermal Transfer Labels. Of course, our Thermal Transfer Labels are suitable for use in the THARO Printer Series but also for any model of Thermal Transfer Printer on the market.

Get the best print quality

As you can see on the diagram below, the only way to get good print quality is to follow this advice:
You must use a good printer and set it up correctly (especially the print temperature)
You must use the correct Thermal Transfer ribbon ink formulation for your labels, all ribbons cannot be used on all kinds of labels
You must use the appropriate labels, suitable for your needs and your application

This ink formulation is for use with all common Vellum paper. This ribbon has a high resistance to solvents and needs lower print temperatures than all other formulations. These ribbons provide a very good print quality with very low temperature and increase your Printhead’s life.

ReferenceDesigantion
Base Film thickness4.3 +/- .3 micron
Ribbon Thickness6.9 +/- .3 micron
Ink ColourBlack
Printing Density> 1.90 Macbeth Densitometer
Transmission Density> 1.60 Macbeth Densitometer
Ink Melting Point50°C
Sensitivity11 mj/mm²
Recommended Maximum Print Speed203 mm/second

This formulation is for use with all common Vellum or coated paper. This ribbon has a high resistance to solvents.

ReferenceDesigantion
Base Film thickness4.5 +/- .3 micron
Ribbon Thickness7.7 +/- .3 micron
Ink ColourBlack
Printing Density> 1.90 Macbeth Densitometer
Transmission Density> 1.60 Macbeth Densitometer
Ink Melting Point70°C
Sensitivity11 mj/mm²
Recommended Maximum Print Speed305 mm/second

This ribbon has a higher percentage of resin, and provides a very high resistance against rubbing on any kind of paper. This ribbon requires a high print temperature.

ReferenceDesigantion
Base Film thickness4.6 +/- .3 micron
Ribbon Thickness8.1 +/- .3 micron
Ink ColourBlack
Printing Density> 2.10 Macbeth Densitometer
Transmission Density> 1.50 Macbeth Densitometer
Ink Melting Point80°C
Sensitivity13 mj/mm²
Recommended Maximum Print Speed203 mm/second

This ribbon has a higher percentage of resin, and provides a very high resistance against rubbing on any kind of paper. This ribbon requires a high print temperature.

ReferenceDesigantion
Base Film thickness4.6 +/- .3 micron
Ribbon Thickness10.0 +/- .3 micron
Ink ColourBlack
Printing Density> 1.90 Macbeth Densitometer
Transmission Density> 1.30 Macbeth Densitometer
Sensitivity14 mj/mm²
Recommended Maximum Print Speed203 mm/second

The kind of ribbon is used for print of synthetic labels. It has a high resistance against rubbing and solvent. The ribbon is specifically used in the chemical, pharmaceutical and electronic industries. This needs a high print temperature.

ReferenzDesigantion
Base Film thickness4.5 +/- .3 micron
Ribbon Thickness8.8 +/- .3 micron
Ink ColourBlack
Printing Density> 1.8 Macbeth Densitometer
Transmission Density> 1.0 Macbeth Densitometer
Sensitivity17 mj/mm²
Recommended Maximum Print Speed152 mm/second

Near Edge Ribbon for use with printer with Near Edge Printhead :

Ribbons for printers with Near Edge Printhead such as (Tec, Avery Dennison, etc.) are available in the 3 different ink formulations: wax, wax-resin and resin. Contact us for the appropriate Near Edge Ribbon.

Colour Thermal Transfer Ribbon:

We are also able to provide you Thermal Transfer ribbon in different colours for your special projects. Contact us for a quote.

Request a quote for Ribbons | Labels

The following specifications are needed in order for us to provide the correct ribbon for your printer :
  1. The Ink side (is the ink on the inside or outside of the roll of ribbons, depending on the printer’s model and manufacturer).
  2. The size of the CORE (the standard sizes are ½” or 12mm, 1” or 25 mm and 40mm).
  3. The Width of the roll. We recommend to always use a ribbon a little wider than the labels you are using (4mm wider or 2mm on each side)
  4. The Length of the roll. (The maximum ribbon length depends on the printer’s model and manufacturer).

Request a Quote