The Tharo PA500w Printer/Applicator can apply over 100 labels per minute. Label size and application dependent.
Placement accuracy is assured by the printer’s stepper motor control. The PA500w is delivered with a product sensor and controller to control the triggering of the applicator for positioning a label on a product. Accuracy is label size and application dependent.
With minimal training, quick integration and increased productivity, the PA500w is an inexpensive solution for your demanding labeling requirements. Since the system is all electric, there is no need for compressed air, which makes the PA500w an excellent money saver!
The PA500w was built to last with time-tested components. With rugged dependability, the PA500w provides accurate and worry-free operation with maximum up time and low maintenance.
STATE-OF-THE-ART PRINTING PERFORMANCE
The Tharo thermal/thermal transfer label printers print with 203 or 300 dpi resolution while incorporating advanced label handling capabilities.
EASY TO SERVICE
With few moving parts, the PA500w is easy to service and our reliable, after-sales customer service provides you with excellent technical support.
BUILT-IN EFFICIENCY AND VERSATILITY
The wipe-on brush assures proper application to smooth, flat surfaces as well as uneven surfaces. You can apply labels from 76,2mm x 25,4mm to 114,3mm x 177,8mm to a variety of items, including cartons, tray and blister packages, bags and cans.
EASY TO USE
The compact PA500w is simple to operate. You can quickly setup and changeover the PA500w for top apply or side apply. The PA500w also integrates easily into existing production lines and packaging systems.
|Minimum Label Size||76,2mm x 25,4mm (3″ x 1″)|
|Maximum Label Size||114mm x 177,8mm (4,5″ x 7,0″)|
|Placement Accuracy||+/- 3mm (0,125″)|
|Speed||Over to 100 labels per minute|
|Weight of Applicator w/table||9,07kg (20 lbs)|
|Weight of Stand||55kg (120 lbs)|
|Weight of Stand only||43kg (95 lbs)|
|Supply Roll||200mm (8″) maximum O.D. on cores from 39,9mm to 76,2mm (1,57″ to 3″)|
|Printer Type||Tharo H-Series, or Apollo Direct Thermal or Thermal Transfer Printers|
|Power Source||Switchable: 100V 60Hz or 230V 50Hz|
|Environmental||Temp 10-35°C (50-95°F) at 10-85% humidity|
|Standards||Built to CE safety and emissions standards. RoHS compliant upon request|
|WARNING BEACON||The warning beacon functions as a visual display for applicator and printer errors.|
|PRODUCT SENSOR||The product sensor functions as an automatic trigger device, which sends a start signal to the applicator.|
|FOOT SWITCH||The foot switch functions as a manual trigger device, which sends a start signal to the applicator when it is pressed.|
|PRODUCT SENSOR TIMER||The product sensor timer is used to delay the application process.|
|HAND CRANKED HEIGHT ADJUSTABLE H-BASE STAND||Allows for extremely precise height adjustment, while providing stability, and allowing the PA1200 to be used with a conveyor or other automated system. This is required if the applicator is to be used with the external Unwind/Rewind. Locking casters are available for the stand.|
|TABLE-TOP STAND||Allows the PA2000 applicator to be placed on a table as an alternative to the H-Base Stand.|
|EXTERNAL UNWIND/REWIND||Accommodates up to 14″ OD roll of label stock, and allows for quick replacement of media, which helps keep downtime to a minimum. The H-base stand is required for this accessory.|