The PA2000 is a powerful accessory for Tharo H-400/H-600 Series thermal transfer/direct thermal bar code label printers. The PA2000 features a smaller footprint, 16.5″ wide x 32″ tall x 30″ long, than other Printer/Applicators, with a remote front panel for easy access, regardless of the orientation of the applicator. This allows the PA2000 to be installed in locations where other Printer/Applicators cannot.

ReferenceDesignation
Minimum Label Size5mm x 5mm (0,20″ x 0,20″) with specialty tamp
Maximum Label Size152,4mm x 203mm (6″ x 8″)
Placement AccuracyStationary: +/- 0,25mm (0,01″) or Moving: +/- 3mm (0,125″) (for example: conveyor belt applications)
SpeedUp to 58 labels per minute∗
Weight of Applicator12-17kg (27-37lbs)
Weight of Stand55kg (120 lbs)
Standard Stroke Length432mm (17″) total (254mm (10″) below table) Custom length cylinders are available upon request
Air Requirement5 to 6 bar (75 to 90 psi)
Printer TypeTharo H-427, H-436, H-626 or H-634 Direct Thermal or Thermal Transfer Printers
Power SourceSwitchable: 100V 60Hz or 230V 50Hz
EnvironmentalTemp 10-35°C (50-95°F) at 10-85% humidity
StandardsBuilt to CE safety and emissions standards. RoHS compliant upon request
∗Speeds are approximate. Product size, label size, printer model and conveyor speed will determine actual throughput.

 

 

 

 

 

ReferenceDesignation
WARNING BEACONThe warning beacon functions as a visual display for applicator and printer errors.

ImgBeacon

PRODUCT SENSORThe product sensor functions as an automatic trigger device, which sends a start signal to the applicator.

ImgSensor

FOOT SWITCHThe foot switch functions as a manual trigger device, which sends a start signal to the applicator when it is pressed.

ImgFootswitch

PRODUCT SENSOR TIMERThe product sensor timer is used to delay the application process.

ImgTimer

HAND CRANKED HEIGHT ADJUSTABLE H-BASE STANDAllows for extremely precise height adjustment, while providing stability, and allowing the PA1200 to be used with a conveyor or other automated system. This is required if the applicator is to be used with the external Unwind/Rewind.  Locking casters are available for the stand.

ImgHBase

TABLE-TOP STANDAllows the PA2000 applicator to be placed on a table as an alternative to the H-Base Stand.

ImgTablestand

EXTERNAL UNWIND/REWINDAccommodates up to 14″ OD roll of label stock, and allows for quick replacement of media, which helps keep downtime to a minimum. The H-base stand is required for this accessory.

ImgUnwind

PA2000 for 4 inch Printers and 6 inch Printers

PA2000-300x180    6inchPA2000-300x180