Released: 08/02/2007

The following printer families are supported :

Printer Manufacturer
Avery DennisonCAB/GeminiCitizen
Any Windows Printer Driver

This version includes the following new printers :

Printer Model
Tharo H-427Tharo H-436
Tharo H-626Tharo H-634
Godex EZ-2200+Godex EZ-2300+
Godex EZ-6200+Godex EZ-6300+
Godex EZ-1100+Godex EZ-1200+
Godex EZ-1300+Godex EZ-DT-2
Godex EZ-DT-4

The following changes/additions have been made :

1. Barcode Wizard
When creating a barcode using the “EAN/UCC 128 Wizard” and the first AI is 00 or 01, an extra check digit was applied to the entire barcode. The check digit was not shown in the interpretation, but could be seen by scanning the generated barcode. This has been corrected.

2. Zebra printers and barcodes with bearer bars
If the format had a left margin, any barcode that has bearer bars would not print correctly. The bearer bars were shifted with respect to the position of the barcode. This has been corrected.

3. Incorrect Mod 10 check digit
Selecting a UPC Mod 10 checkdigit (for Code 128 for example) and entering an even number of characters, the calculated check digit was incorrect. The calculation should be the same as the one used for EAN barcodes. This has been fixed.

4. Print preview not correct
If a field had “enable printing” based on a condition, the display was not updated correctly after entering the when printed or database keys. The display did not reflect the enable/disable state of the fields. This has been corrected.

5. Zebra printers and date/time offsets
Corrected a problem in the Zebra driver when using date or time fields that have an offset. Incorrect printer commands were sent if more than one field had an offset.

6. Long pauses in User Interface
Corrected a problem that resulted in long pauses before the screen was updated. This occurred when accessing printer properties or adding/changing text fields.

7. ActiveX fixes
Fixed several problems when using the ActiveX controls. On some operating systems, a crash would result when running already compiled projects or when creating a new project and adding a control to a form.